Repairs
Repair & Maintenance
Whether the door was hit, has drifted out of alignment or has simply grown loud and tired, the work in this group aims at the same result: a door that runs smoothly, seals properly and does not need thinking about.
Which one do I need?
- There is a new sound.Garage Door Safety Inspection
- On windy nights the door rattles in its frame, there is a line of daylight along one side, and the bottom seal has gone hard and flat.Garage Door Tune-Up
- The rollers on the door have been squealing for months.Off-Track Garage Door Reset
- After an overnight freeze the door stuck to the slab, the opener strained, and something gave.Garage Door Panel Replacement
- After a spring rain there is a puddle inside the door that reaches the tires.Garage Door Bottom Seal Replacement
- After a windy night there is a fine ridge of snow on the garage floor along one side of the door, and another across the top step.Garage Door Perimeter Weatherstrip
Repair & Maintenance
Inspection, adjustment, sealing, and section-level repairs.
Garage Door Safety Inspection
Watching one full cycle under power
Before anything is measured, the technician stands back and runs the door through a full open and close, listening as much as watching. A healthy door sounds even from bottom to top; a knock at the turn into the horizontal track, a squeal at a particular hinge, a grinding drum or a motor that changes pitch under load each point somewhere specific. The eyes follow both bottom corners to see whether they leave the floor together, the top section as it passes the curve, and the final inch of closing, where the door should settle onto its seal without a thud.
This one cycle often tells the technician where to spend the rest of the visit.